Polaris Magnum 330 - Manual (Page 44)

41
FEATURES AND CONTROLS
Brakes
Master Cylinder
Check the brake fluid level in
the master cylinder before each
use of the ATV. The master
cylinder (1) is located on the left
handlebar.
View the fluid level through the
indicator window (2) on the top of
the master cylinder. This eye will
appear dark when the fluid level is
full. When fluid is low, the eye will
be clear. NOTE: When checking the fluid level, position the ATV on
level ground with the handlebars turned so the top of the reservoir is
level. If the fluid level is low, add DOT 3 brake fluid. DO NOT
OVERFILL. See page 130 for the part numbers of Polaris products.
1
2
An over-full master cylinder may cause brake drag or brake
lock-up, which could result in serious injury or death. Maintain
brake fluid at the recommended level. Do not overfill.
WARNING
Never store or use a partial bottle of brake fluid. Brake fluid is
hygroscopic, meaning it rapidly absorbs moisture from the air.
The moisture causes the boiling temperature of the brake fluid
to drop, which can lead to early brake fade and the possibility of
accident or severe injury. After opening a bottle of brake fluid,
always discard any unused portion.
WARNING