Polaris Magnum 330 - Manual (Page 103)

100
MAINTENANCE AND LUBRICATION
Lights
Headlight Lamp Replacement (Magnum 500)
1. Remove the three screws on the headlight pod.
2. Using a small flat-blade screwdriver, push in on the lock tabs
through the two small openings at the front of the headlight pod.
3. Lift the pod slightly while depressing the tabs.
4. Lift the pod cover and disconnect the speedometer harnesses from
the speedometer. Unplug the indicator light harness and remove
the pod cover.
5. Unplug the headlamp from the wiring harness. Be sure to pull on
the connector, not on the wiring.
6. Grasp the bulb housing and turn counterclockwise to remove lamp.
7. Apply dielectric grease to the light bulb socket before installing the
new bulb.
8. Reverse the previous steps to replace the lamp and reassemble the
pod.