beautypg.com

Features and controls, Instrument cluster (magnum 330) – Polaris Magnum 330 User Manual

Page 58

background image

55

FEATURES AND CONTROLS

Instrument Cluster (Magnum 330)

Rider Information Center

The rider information center is located in the lower portion of the

instrument cluster.
1. Gear Indicator - As the

shift lever is moved, this

will indicate the gear the

machine is in:
H = High Range
L = Low Range
N = Neutral
R = Reverse
P = Park
E or blank = Error - The

error message usually means

the gear selector is in between

gears. It can, however, also

indicate that the transmission

switch needs repair.
2. High Engine Coolant Temperature - Do not continue to operate the

ATV is this warning appears or serious engine damage could result.

3. Hour Meter
4. Service Interval/Miscellaneous Service Warnings
5. Low Battery and Over Voltage - This warning usually indicates

that the ATV is being operated at an RPM too low to keep the

battery charged. A low battery warning may also occur under normal

operation if the machine is at idle and high electrical load (lights,

cooling fan, accessories) is applied. Driving at a higher RPM or

connecting a battery charger will usually clear the warning.

NOTE: If the instrument cluster no longer illuminates, it’s possible

that a battery over voltage occurred and the instrument cluster has shut

off to protect the electrical system. If this occurs take the ATV to your

Polaris dealer for proper diagnosis.
NOTE: All segments of the rider information center will light up for

2.5 seconds at start-up.

2

5

4

3

1

This manual is related to the following products: