Polaris Magnum 330 - Manual (Page 99)

96
MAINTENANCE AND LUBRICATION
Lubrication Recommendations
Rear Gearcase Oil Check
Check the rear gearcase oil level
monthly, and change the oil annually.
Maintain the rear gearcase oil level at
the bottom of the fill hole threads. We
recommend the use of Polaris ATV
Angle Drive Fluid. See page 130 for
the part numbers of Polaris products.
1. With machine on level ground,
remove the gearcase fill plug (1)
and inspect the oil level. Maintain
the oil level at the bottom of the
fill hole threads (2).
2. If the oil level is low, add the
recommended lubricant as needed.
3. Reinstall the fill plug and torque to
14 ft. lbs. (19 Nm).
4. Check for leaks.
Rear Gearcase Oil Change
1. Remove the drain plug (3) located on the bottom of the gearcase.
Catch and discard the used oil properly.
2. Clean and reinstall the drain plug with a new sealing washer.
Torque to 14 ft. lbs. (19 Nm).
3. Remove the fill plug and add 10 oz. (300 ml) of the
recommended gearcase oil.
4. Reinstall the fill plug. Torque to 14 ft. lbs. (19 Nm).
5. Check for leaks.
2
3
1