Polaris Magnum 330 - Manual (Page 96)

93
MAINTENANCE AND LUBRICATION
Lubrication Recommendations
Transmission Oil Change
1. Remove the propshaft shield (if equipped) from the right side of
the vehicle to access the fill plug.
2. Remove the fill plug.
3. Remove the transmission drain plug located on the bottom left
hand side and drain the oil. Catch and discard used oil properly.
4. Clean and reinstall the drain plug torque to 14 ft. lbs. (19 Nm).
5. Add the correct amount of AGL Synthetic Gearcase Lubricant.
Refer to the specifications section beginning on page 131 for
capacities.
6. Reinstall the fill plug and check for leaks.
7. Reinstall the propshaft shield (if equipped).