ParkerVision WR3000 - Manual (Page 64)

WR3000
4-Port Wireless DSL/Cable Router
®
66
Retype to Confi rm Retype to Confi rm Type your password again here to ensure that what you entered in the Password
fi eld above was what you intended.
Nailed-up
Connection
Select Select Nailed Up Connection Nailed Up Connection if you do not want the connection to time out. if you do not want the connection to time out.
Idle Timeout Specify the time in seconds that elapses before the WR3000 Wireless Specify the time in seconds that elapses before the WR3000 Wireless
Router automatically disconnects from the PPTP server.
PPTP Confi guration PPTP Confi guration
My IP Address
Type the (static) IP address assigned to you by your ISP. Type the (static) IP address assigned to you by your ISP.
My IP Subnet Mask My IP Subnet Mask Type the subnet mask assigned to you by your ISP (if given). Type the subnet mask assigned to you by your ISP (if given).
Server IP Address Server IP Address Type the IP address of the PPTP server. Type the IP address of the PPTP server.
Connection ID/Name Connection ID/Name Type your identifi cation name for the PPTP server. Type your identifi cation name for the PPTP server.
Apply Click Click Apply to save your changes back to the WR3000 Wireless Router.
Reset Click Click Reset to begin confi guring this screen afresh. to begin confi guring this screen afresh.