ParkerVision WR3000 - Manual (Page 44)

WR3000
4-Port Wireless DSL/Cable Router
®
46
LABEL DESCRIPTION
Active Select Yes from the drop-down list box to enable
roaming on the WR3000 if you have two or more
WR3000 wireless routers on the same subnet.
All routers on the same subnet and the
wireless stations must have the same ESSID
to allow roaming.
Port Enter the port number to communicate roaming
information between routers. The port number must be
the same on all routers. The default is 16290. Make
sure this port is not used by other services.
Apply Click Apply to save your changes back to the WR3000
wireless router
Reset Click Reset to reload the previous confi guration for this
screen.
6.4.3 Confi guring Roaming on the WR3000
Enable the roaming feature if you have two or more WR3000 on the same subnet. Follow the
steps below to allow roaming on your WR3000.
Step 1. From the main menu, enter 3 to display LAN Setup.
Step 2. Enter 5 to display Wireless LAN Setup (as shown below).
Wireless LAN Setup
ESSID = Wireless
Hide ESSID = No
Channel ID = CHOI 2412MHz
RTS Threshold = 0
ESSID = Wireless
Hide ESSID = No
Channel ID = CHOI 2412MHz
RTS Threshold = 0