ParkerVision WR3000 - Manual (Page 141)

WR3000
4-Port Wireless DSL/Cable Router
®
143
[ENTER] or [UP]/
[DOWN] arrow keys.
Within a menu, press [ENTER] to move to the next fi eld. You can
also use the [UP]/[DOWN] arrow keys to move to the previous
and the next fi eld, respectively.
Entering
information
Type in or press
[SPACE BAR], then
press [ENTER].
You need to fi ll in two types of fi elds. The fi rst requires you to type You need to fi ll in two types of fi elds. The fi rst requires you to type
in the appropriate information. The second allows you to cycle
through the available choices by pressing [SPACE BAR].
Required fi elds Required fi elds or or ChangeMe ChangeMe All fi elds with the symbol must be fi lled in order to be able to All fi elds with the symbol must be fi lled in order to be able to
save the new confi guration.
All fi elds with ChangeMe must not be left blank in order to be
able to save the new confi guration.
N/A fi elds N/A fi elds Some of the fi elds in the SMT will show a . This symbol Some of the fi elds in the SMT will show a . This symbol
refers to an option that is Not Applicable.
Save your Save your
confi guration
[ENTER] Save your confi guration by pressing [ENTER] at the message Save your confi guration by pressing [ENTER] at the message
“Press ENTER to confi rm or ESC to cancel”. Saving the data on
the screen will take you, in most cases to the previous menu.
Exit the SMT Exit the SMT Type 99, then press
[ENTER].
Type 99 at the main menu prompt and press [ENTER] to exit the
SMT interface.