Wr3000, Port wireless dsl/cable router – ParkerVision WR3000 User Manual

Page 32

WR3000

4-Port Wireless DSL/Cable Router

LABEL

DESCRIPTION

Time Protocol

Select the time service protocol that your time server sends when you turn on the router. Not all time servers

support all protocols, so you may have to check with your ISP/network administrator or use trial and error to ﬁ nd a

protocol that works.

The main difference between them is the format. Daytime (RFC 867) format is day/month/year/time zone of the

server. Time (RFC 868) format displays a 4-byte integer giving the total number of seconds since 1970/1/1 at 0:0:0.

The default, NTP (RFC 1305), is similar to Time (RFC 868). Select None to enter the time and date manually.

Time Server

Address

Enter the IP address or the URL of your time server. Check with your ISP/network administrator if you are unsure

of this information (the default is tick.stdtime.gov.tw).

Current Time (hh:

mm:ss)

This ﬁ eld displays the time of your WR3000. Each time you reload this page, the WR3000 synchronizes the

time with the time server.

New Time (hh:

mm:ss)

This ﬁ eld displays the last updated time from the time server. When you select None in the Time Protocol

ﬁ eld, enter the new time in this ﬁ eld and then click Apply.

The table below describes the

labels in this screen.

SYSTEM

Time Setting

General

DDNS

Password

Time Protocol

Time Server Address

Current Time (hh:mm:ss)

New Time (hh:mm:ss)

Current Date (yyyy/mm/dd)

New Date (yyyy/mm/dd)

2000 1

Time Zone

(GMT) Greenwich Mean Time: Dublin, Edinburgh, Libson, London

Daylight Savings

Start Date (mm-dd)

(Month)

(Day)

(Month)

(Day)

End Date (mm-dd)

Apply

Reset

None

192.43.244.18