Wr3000, Port wireless dsl/cable router – ParkerVision WR3000 User Manual

Page 136

WR3000

4-Port Wireless DSL/Cable Router

138

16.6.3 Back to Factory Defaults
Clicking the

Reset button in this section clears all user-entered conﬁ guration information and

returns the WR3000 Wireless Router to its factory defaults as shown on the screen. This will

erase all conﬁ gurations that you have applied.

Click the

Default tab to display the screen shown next.

Clicking the

Reset button will cause the following screen to be displayed:

You can also press the

RESET button on the side panel to reset the factory defaults of your

WR3000 Wireless Router. Refer to the Resetting the WR3000 Wireless Router section for more

information on the RESET button.

The router will now reboot.

As there will be no indication of when the process is complete,

please wait for one minute before attempting to access the

router again.

CONFIGURATION

Router back to factory defaults

CONFIGURATION

Click Reset to clear all user-entered configuration information

and return to factory defaults. After resetting, the

-Password will be 1234

-LAN IP address will be 192.168.150.1

-DHCP will be reset to server

Reset

Default

Restore

Backup