Wr3000, Port wireless dsl/cable router – ParkerVision WR3000 User Manual

Page 54

WR3000

4-Port Wireless DSL/Cable Router

password.

Select

RADIUS Only to have the WR3000 Wireless Router just check the user database on the

speciﬁ ed RADIUS server for a wireless station’s username and password.

Select

Local ﬁ rst, then RADIUS to have the WR3000 Wireless Router ﬁ rst check the user

database on the WR3000 Wireless Router for a wireless station’s username and password. If

the user name is not found, the WR3000 Wireless Router then checks the user database on

the speciﬁ ed RADIUS server.

Select

RADIUS ﬁ rst, then Local to have the WR3000 Wireless Router ﬁ rst check the user

database on the speciﬁ ed RADIUS server for a wireless station’s username and password. If

the WR3000 Wireless Router cannot reach the RADIUS server, the WR3000 Wireless Router

then checks the local user database on the WR3000 Wireless Router. When the user name

is not found or password does not match in the RADIUS server, the WR3000 Wireless Router

will not check the local user database and the authentication fails.

Dynamic WEP

Key Exchange

This ﬁ eld is activated only when you select

Authentication Required in the Wireless Port

Control ﬁ eld. Also set the Authentication Databases ﬁ eld to RADIUS Only. Local user

database may not be used.

Select

Disable to allow wireless stations to communicate with the Wireless Routers without

using dynamic WEP key exchange.

Select

64-bit WEP or 128-bit WEP to enable data encryption.