ParkerVision WR3000 - Manual (Page 167)

WR3000
4-Port Wireless DSL/Cable Router
®
169
Windows 95/98/Me - Continued
3. Click the Gateway tab.
-If you do not know your gateway’s IP address, remove
previously installed gateways.
-If you have a gateway IP address, type it in the New
gateway fi eld and click Add.
4. Click OK to save and close the TCP/IP
Properties window.
5. Click OK to close the Network window. Insert
the Windows CD if prompted.
6. Turn on your WR3000 Wireless Router and re
start your computer when prompted.
Verifying Your Computer’s IP Address
1. Click Start and then Run.
2. In the Run window, type “winipcfg” and then click OK to open the IP
Confi guration window.
3. Select your network adapter. You should see your computer’s IP address, subnet
mask and default gateway.