Wr3000, Port wireless dsl/cable router, Remote management – ParkerVision WR3000 User Manual
Page 102
WR3000
4-Port Wireless DSL/Cable Router
®
104
The following table describes the labels in this screen.
Telnet
LABEL
DESCRIPTION
DESCRIPTION
Server Port
Server Port
You may change the server port number for a service if needed, however, you must use
You may change the server port number for a service if needed, however, you must use
the same port number in order to use that service for remote management.
Server Access
Select the interface(s) through which a computer may access the WR3000 Wireless
Router using this service.
Secured Client
Secured Client
IP Address
A secured client is a “trusted” computer that is allowed to communicate with the WR3000
A secured client is a “trusted” computer that is allowed to communicate with the WR3000
Wireless Router using this service.
Select
All to allow any computer to access the WR3000 Wireless Router using this service.
Apply
Reset
REMOTE MANAGEMENT
Server Port
23
Server Access
LAN
Secured Client IP Address
All
Selected
0.0.0.0
TELNET
TELNET
FTP
WWW
SNMP
DNS
Security