ParkerVision WR3000 - Manual (Page 154)

WR3000
4-Port Wireless DSL/Cable Router
®
156
WEP Select Select Disable to allow wireless stations to communicate with the Wireless
Routers without any data encryption. Select 64-bit WEP or 128-bit WEP
to enable data encryption.
Disable
Default Key Default Key Enter the key number (1 to 4) in this fi eld. Only one key can be enabled at Enter the key number (1 to 4) in this fi eld. Only one key can be enabled at
any one time. This key must be the same on the WR3000 Wireless Router
and the wireless stations to communicate.
1
Key 1 to
Key 4
The WEP keys are used to encrypt data. Both the WR3000 Wireless
Router and the wireless stations must use the same WEP key for data
transmission.
If you chose 64-bit WEP in the WEP Encryption fi eld, then enter any 5
ASCII characters or 10 hexadecimal characters (“0-9”, “A-F”). If you chose
128-bit WEP in the WEP Encryption fi eld, then enter 13 ASCII characters
or 26 hexadecimal characters (“0-9”, “A-F”).
0x12345abcde
Enter “Ox” before the key to denote a hexadecimal Enter “Ox” before the key to denote a hexadecimal
key. Don’t enter “Ox” before the key to denote a ASCII
key.
Authen. Press [SPACE BAR] to select Press [SPACE BAR] to select Auto, Open System Only Auto, Open System Only or Shared Key Shared Key Auto