Pioneer CNDV-40R - Manual (Page 89)

87
Chapter 5
Combining and Using Pioneer AV Equipment
Other Functions
Customize the settings to suit your taste and
environment.
Displaying the SETUP MENU
1
Press the A.MENU (AUDIO) button in
each source display.
2
Press
5 or ∞ to select “SETUP”, and
press the A.MENU (AUDIO) button.
The SETUP MENU is displayed as follows:
VIDEO SETTING
AUTO FLAP
REAR MONITOR
You can operate a desired function. For
details, refer to the pages for each of the func-
tions.
❒ Select “BACK” in the menu display or
press BACK/FUNC button to return to
the previous display.
❒ To cancel the menu, press the BAND/
ESC button.
Selecting the video
Set so that only the display video can be selected.
The display for this menu is the same regardless
of which source you operate from.
1
Press
5 or ∞ to select “VIDEO SETTING”
from the SETUP MENU, and press the
A.MENU (AUDIO) button.
2
Press
2 2 2 2 or 3 3 3 3 to select “VIDEO”.
Press
2 or 3 until the desired video setting
appears in the display.
OFF(off)
— VIDEO (video) — BACK UP
CAMERA (rear view camera) — M-DVD
(Multi-DVD)
❒ If the equipment is connected to a RCA
video input, choose “VIDEO” to view video
of the equipment.
❒ When using a Pioneer DVD player or Multi-
DVD player connected with an RCA and IP-
BUS cable, select “M-DVD”. Otherwise,
there will be no picture even if you switch
sources.
❒ When using a Pioneer DVD player or Multi-
DVD player connected with an AV-BUS
cable, do not select “M-DVD”. If you do,
there will be no picture.
❒ If rear view camera is not connected, do
not select “BACK UP CAMERA”.
❒ If you select “BACK UP CAMERA”, press
∞ to move to “BACK UP CAMERA
POLARITY”, or use
2 or 3 to select
“BATTERY” and “GROUND”.
BATTERY :
When the gear lever is moved to the REVERSE
(R) position, and the polarity of the connected
lead wire is positive.
GROUND :
When the gear lever is moved to the REVERSE
(R) position, and the polarity of the connected
lead wire is negative.
❒ Using a commercially available rear view
camera with the proper setting, Pioneer AV
Head Unit automatically switches to the rear
view camera image when the gear shift is
moved to the REVERSE (R) position. For more
information, consult your dealer or the near-
est authorized PIONEER service facility.
❒ If you do not operate the function within about
30 seconds, the menu is automatically can-
celed.