Pioneer CNDV-40R - Manual (Page 80)

78
Chapter 5
Combining and Using Pioneer AV Equipment
1
Press
5 5 5 5 or ∞ ∞ ∞ ∞ to select “CH.SELECT
MODE” from the XM TUNER MENU, and
press the A.MENU (AUDIO) button.
2
Press
2 2 2 2 or 3 3 3 3 to select the desired channel
select mode.
CH NUMBER (Channel number select
mode) — CATEGORY (Channel category
select mode)
Storing the channel
Once stored in memory, you can easily select a
desired channel from the P.CH MEMORY.
1
Press
5 5 5 5 or ∞ ∞ ∞ ∞ to select “P.CH MEMORY”
from the XM TUNER MENU, and press the
A.MENU (AUDIO) button.
2
Adjust channel with
2 2 2 2 or 3 3 3 3.
3
Select a preset channel number with
5 5 5 5 or
∞ ∞ ∞ ∞ and press the A.MENU (AUDIO) button.
4
If you want to preset channel one after
another, use
5 5 5 5 or ∞ ∞ ∞ ∞ to move to the next
preset channel you want to use to store a
channel, and perform the same operation.
When you have finished, press the BAND/
ESC button to return to the source display.
❒ Up to 18 stations, 6 for each of three XM
bands can be stored in memory.
Recalling channel
If you press
5 or ∞ you can easily store up to six
previously registered channels.
1
Press
5 5 5 5 or ∞ ∞ ∞ ∞ to select “P.CH RECALL”
from the XM TUNER MENU, and press the
A.MENU (AUDIO) button.
2
Select a preset channel number with
5 5 5 5 or
∞ ∞ ∞ ∞ and press the A.MENU (AUDIO) button.
When you have finished, press the BAND/
ESC button to return to the source display.
❒ You can also use 5 or ∞ to recall stations
assigned to preset channels.
Display the ID Code
Each XM tuner is identified with a unique radio
ID. You will need the radio ID when activating XM
service or when reporting a problem. How to dis-
play the ID code depends on the channel select
mode.
Channel number select mode
If you select “CH000”, the ID code is displayed.
1
Select “CH000” with
2 2 2 2 or 3 3 3 3.
Channel category select mode
RADIO ID is provided as a channel category for
displaying the ID code.
1
Select the Channel Category RADIO ID
with
5 5 5 5 or ∞ ∞ ∞ ∞.
❒ If you select another channel, display of the ID
code is canceled.
❒ Display of the ID code repeats displaying.
RADIO ID and the ID code one after the other.
Switching the Display
Each XM channel has a channel number and
channel name. XM programming also carries
song or program title, artist name and category,
when available.
1
Press the DISP button.
Press the DISP button repeatedly to switch
between the following settings.
Channel name
— Artist name/feature —
Song/program title — Channel number —
Channel category
❒ When you switch the display, the text is auto-
matically scrolled.
Scrolling the text in the display
You can scroll the text to the left so that the rest
of the text can be seen.
1
Press and hold the DISP button until the
text begins to scroll to the left.
The rest of the text will appear in the display.