Pioneer CNDV-40R - Manual (Page 61)

59
Chapter 5
Combining and Using Pioneer AV Equipment
(1) Source name
(2) You can operate the functions of each
source.
(3) Audio is adjusted.
(4) Other settings are performed.
(5) Menu name
(6) Available buttons of the Remote Control
❒ (3) and (4) are common for the screen of
each source.
3
Press
5 5 5 5 or ∞ ∞ ∞ ∞ to select an item, and press
the A.MENU (AUDIO) button.
The list of the items you can operate appears.
Menus displayed on the screen differ accord-
ing to the selected source.
4
Repeat Step 3 and display the item you
want to operate and the current setting.
5
Press
5 5 5 5 or ∞ ∞ ∞ ∞ to select the item you want
to operate, and press
5 5 5 5, ∞ ∞ ∞ ∞, 2 2 2 2 and 3 3 3 3 to
change the setting.
As you press the BACK/FUNC button, the
previous screen is displayed. If you want to
change other settings, repeat the Steps 3 to 5.
❒ You can also select “BACK” and press the
A.MENU (AUDIO) button to return to the
previous screen.
6
Press the BAND/ESC button to end the
operation.
Original screen appears.
TUNER
These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on page 60.
(1) Band indicator
Shows which band the radio is tuned to AM or
FM.
(2) Frequency indicator
Shows to which frequency the tuner is tuned.
(3) Preset number indicator
Shows what preset has been selected.
(4) STEREO indicator
Shows that the frequency selected is being
broadcast in stereo.
(5) LOC indicator
This is indicated unless local seek turning is
turned off.
(4) (1) (5) (3) (2)
NAVI/AV
button
N/A