Pioneer CNDV-40R - Manual (Page 31)

29
Chapter 2
Setting a Route to Your Destination
Chapter 2
Setting a Route to Your Destination
• For safety reasons, these route-setting
functions are not available while your
vehicle is in motion. To enable these func-
tions, you must stop in a safe place and
put on the parking brake before setting
your route.
❒ Some information on traffic regulations by
day or time depends on the time when the
route calculation is performed. Thus, the
information may not correspond with a cer-
tain traffic regulation when your vehicle actu-
ally passes the location. Also, the information
on the traffic regulations provided will be for a
passenger vehicle, and not for a truck/lorry or
other delivery vehicles. Always follow the
actual traffic regulations while driving.
❒ If you press the NAVI button during route cal-
culation, the calculation is canceled and the
map display appears.
Finding Your Destination by
Selecting the Type of Facility
Information about various facilities (Points Of
Interest - POI), such as gas stations, amusement
parks or restaurants is available. By selecting the
category (or entering the POI Name), you can
search for a Point Of Interest.
❒ You can also narrow down the search range
by initially specifying the name of the city or
area where your destination is located.
Searching for Points of Interest
(POI)
1
In the Destination menu, select “POI
Search” and click the OK button.
2
Select the zone.
➲ Selecting the zone where you want to
search
➞ Page 20
3
Select “Category” and click the OK but-
ton.
“Name” :
Select this item if you want to specify the POI
Name at first.
“City” :
Select this item if you want to specify the des-
tination city or area at first.
4
Select the desired category and click the
OK button.
POI’s are divided into several categories.
If the category is not sub-divided into more
detailed categories, the list will not be dis-
played. Proceed to Step 6.
5
Select the subcategory and click the OK
button.
6
Input the name of the POI.
If the list does not automatically appear when
the name of the POI has been entered, try
selecting “OK”.
“City” :
First, select to specify the destination city or
area.
Category