Pioneer CNDV-40R - Manual (Page 16)

14
Manual Overview
This manual provides the important information you need to make full use of your new Navigation Sys-
tem. The beginning sections outline the Navigation System and describe its basic operation. The later
sections describe the details of the navigation functions.
Please note that when you have decided what you want to do, you can find the page you need from the
“Table of Contents”.
If you want to check the meaning of each item displayed on the screen, you will find the necessary page
from the “Display Information” at the end of the manual.
To users updating the application program
Before using this system, check that the program has been updated. If not, upgrade it by referring to
“Installing the Program” on page 93. After installing the program, read “If You Have Changed the Sys-
tem Configuration” on page 94.
How to use this manual
For reasons of safety, it is particularly important that you fully understand your Navigation System
before using it. Be sure to read the Introduction and Chapter 1 in particular.
Basic Operation
If you want to use the Navigation System immediately, please read this section. It
will explain the basics of operating this system, including items appearing on the
display and how to use basics the different menus.
Setting a Route to Your Destination
This section describes various ways of searching the destination, changing the route search
conditions, and the route operation during route guidance.
Editing the Navigation Utilities
Describes convenient functions for navigation, including how to organise information on
places you have visited and how to store data on the PC card.
Customizing Your Navigation System
The behavior of your Navigation System depends on a number of settings. If you need to
change any of the initial settings (default settings), read the relevant section of this chapter.
Combining and using Pioneer AV Equipment
If the Pioneer display, “AVH-P6400CD” or “AVH-P6400”, and Pioneer audio equipment are
connected to your Navigation System, you can operate the audio equipment using the
Remote Control of your Navigation System. This section describes the basic audio operation.
(If neither “AVH-P6400CD” or “AVH-P6400” is connected to your Navigation System, you can
skip this chapter.)
Operating Your Navigation System with Voice
Describes navigation operations such as searching the destination and performing audio
operations by voice.
1
2
3
4
5
6