Pioneer CNDV-40R - Manual (Page 72)

70
Chapter 5
Combining and Using Pioneer AV Equipment
3
Press the BAND/ESC button to select the
desired band.
Press the BAND/ESC button repeatedly to
switch between the following bands:
TV 1
—TV 2.
4
To perform manual tuning, press
2 or 3
briefly.
The channels move up or down step by step.
5
To perform seek tuning, press and hold
2
or
3 for about one second and release.
The tuner will scan the channels until a broad-
cast strong enough for good reception is
found.
You can cancel seek tuning by pressing either
2 or 3 briefly.
If you press and hold
2 or 3, you can skip
broadcasting channels. Seek tuning starts as
soon as you release the keys.
Displaying the TV TUNER
MENU
1
Press the A.MENU (AUDIO) button when
the source is TV.
2
Select “TV TUNER” and press the
A.MENU (AUDIO) button.
The TV TUNER MENU is displayed as follows:
BSSM (BEST STATIONS SEQUENTIAL
MEMORY)
P.CH MEMORY
You can operate a desired function. For
details, refer to the pages for each of the func-
tions.
❒ Select “BACK” in the menu display or press
the BACK/FUNC button to return to the pre-
vious display.
❒ To cancel the menu, press the BAND/ESC
button.
❒ If you do not operate the function within about
30 seconds, the menu is automatically can-
celed.
BSSM (Best Station Sequential
Memory)
The BSSM function automatically memorizes
strongly transmitted broadcast stations in order
from the lowest channel up.
1
Press the BAND/ESC button to display
the band you want to use for BSSM.
2
Select “BSSM (BEST STATIONS
SEQUENTIAL MEMORY)” from the TV
TUNER MENU, and press the A.MENU
(AUDIO) button.
3
Press
5 to turn BSSM on.
“BSSM” turns to green. While “BSSM” is
green the 12 strongest broadcast frequencies
will be stored in order of their signal strength.
When finished, “BSSM” returns to the nor-
mal color.
❒ To cancel the storage process, press ∞.
❒ Up to 12 stations can be memorized in 1
Band.
❒ In regions where reception of no more than 12
station is possible, previously memorized sta-
tions may remain in memory.
Storing broadcast stations
1
Press
5 or ∞ to select “P.CH MEMORY”
from the TV TUNER MENU, and press the
A.MENU (AUDIO) button.
2
Pressing
2 or 3 to tune a station that you
want to store in memory.
Press
2 or 3 for two or more seconds. When
you stop pressing, a strong broadcast station
is received.
Press the opposite
2 or 3 to the one you
pressed to start seek to stop it.