Installation overview – Polycom SpectraLink SCM408 User Manual
Page 9
PN: 1725-36097-001_L.doc
9
Installation Overview
Installation has three phases. In most cases, a separate person is
responsible for each phase.
1. Site preparation and wire installation: This is usually done by a
wire technician or contractor.
2. Installing the SpectraLink system: This is done by Polycom or one
of our certified distributors.
3. Programming the customer’s telephone system to work with the
SpectraLink system: This is usually done by the customer’s system
administrator or technician.
Because these major steps require some parallel activities, it is
important to coordinate the activities among the persons involved.
This table lists the installation steps and the person usually
responsible for each step.
1
This manual is related to the following products:
- SpectraLink SCE408 SpectraLink SCT416 SpectraLink 1725-36097-001 SpectraLink SCA516 SpectraLink SCK416 SpectraLink SCA408 SpectraLink SCJ408 SpectraLink SCI416 SpectraLink SCN416 SpectraLink SCO416 SpectraLink SCJ416 SpectraLink SCO408 SpectraLink SCS416 SpectraLink SCI408 SpectraLink RCC400 SpectraLink SCK408 SpectraLink SCL408 SpectraLink RCU201 SpectraLink SCA416 SpectraLink SCL416 SpectraLink MOG400 SpectraLink SCM416 SpectraLink SCC408 SpectraLink SCC416 SpectraLink SCD416 SpectraLink SCF416 SpectraLink SCN408 SpectraLink SCE416 SpectraLink SCF4089 SpectraLink SCX416 SpectraLink SCD408