Site certification – Polycom SpectraLink SCM408 User Manual
Page 45
PN: 1725-36097-001_L.doc
45
Site Certification
The Polycom field service engineer should not leave the site before
contacting Polycom to perform remote install verification.
Contact a Polycom engineer on the Customer Support Hotline at
(800) 775-5330. The hours of operation are 6 a.m. to 6 p.m. Mountain
time, Monday through Friday.
The engineer will connect with the diagnostic modem, verify calling
functions, and listen while you perform a walk test. The walk test will
require you to walk the inside perimeter of the coverage area. If all
Base Stations are running, note any areas with heavy static or clarity
problems and report them to a Polycom engineer.
The installation is not complete until these certification steps have
been performed. Do not hand out SpectraLink 6000 Wireless
Telephones at a site that has not been certified.
7
- SpectraLink SCE408 SpectraLink SCT416 SpectraLink 1725-36097-001 SpectraLink SCA516 SpectraLink SCK416 SpectraLink SCA408 SpectraLink SCJ408 SpectraLink SCI416 SpectraLink SCN416 SpectraLink SCO416 SpectraLink SCJ416 SpectraLink SCO408 SpectraLink SCS416 SpectraLink SCI408 SpectraLink RCC400 SpectraLink SCK408 SpectraLink SCL408 SpectraLink RCU201 SpectraLink SCA416 SpectraLink SCL416 SpectraLink MOG400 SpectraLink SCM416 SpectraLink SCC408 SpectraLink SCC416 SpectraLink SCD416 SpectraLink SCF416 SpectraLink SCN408 SpectraLink SCE416 SpectraLink SCF4089 SpectraLink SCX416 SpectraLink SCD408