Polycom SpectraLink SCM408 User Manual
Page 37
Install SpectraLink 6000 System
PN: 1725-36097-001_L.doc
37
8. If you select a switch type that is not supported by the MCU type,
the system will alarm. The
ERROR
LED will flash along with
STATUS
LEDs
4
and
5
. For example, this alarm will display if you assign
switch type NEC to an SCB-5XX – Executone MCU.
If this alarm displays, use the table above to verify that your MCU
type supports the selected switch type. If you need to change the
switch type, repeat steps 2 through 6.
This manual is related to the following products:
- SpectraLink SCE408 SpectraLink SCT416 SpectraLink 1725-36097-001 SpectraLink SCA516 SpectraLink SCK416 SpectraLink SCA408 SpectraLink SCJ408 SpectraLink SCI416 SpectraLink SCN416 SpectraLink SCO416 SpectraLink SCJ416 SpectraLink SCO408 SpectraLink SCS416 SpectraLink SCI408 SpectraLink RCC400 SpectraLink SCK408 SpectraLink SCL408 SpectraLink RCU201 SpectraLink SCA416 SpectraLink SCL416 SpectraLink MOG400 SpectraLink SCM416 SpectraLink SCC408 SpectraLink SCC416 SpectraLink SCD416 SpectraLink SCF416 SpectraLink SCN408 SpectraLink SCE416 SpectraLink SCF4089 SpectraLink SCX416 SpectraLink SCD408