Handset status indicator messages – Polycom SpectraLink SCM408 User Manual
Page 51
System Administration
PN: 1725-36097-001_L.doc
51
Handset Status Indicator Messages
Indicator
Description
Action
BATT
Displays when user is on the handset
and the battery charge is low. The user
has two minutes to complete the call.
Replace the Battery Pack with one
that is charged.
BATTERY LOW
Displays when user is not on the
handset and battery charge is low. The
handset will ring to alert user to this
condition. The handset will not work
until the Battery Pack is replaced.
Replace the Battery Pack with one
that is charged.
INTERNAL ERROR
Communications error between the
handset and the MCU.
Have the user turn the handset off,
then on again. If the error persists
try registering another handset to
this port. If the problem persists,
contact technical support.
NO PBX
There is no telephone system port
connected to the port associated with
this handset, or the telephone system
has not yet synchronized the port.
This message should disappear
when the telephone system ports
are wired and programmed
correctly.
PT UNREGISTERED
The handset is not yet registered to an
MCU.
Register the handset.
- SpectraLink SCE408 SpectraLink SCT416 SpectraLink 1725-36097-001 SpectraLink SCA516 SpectraLink SCK416 SpectraLink SCA408 SpectraLink SCJ408 SpectraLink SCI416 SpectraLink SCN416 SpectraLink SCO416 SpectraLink SCJ416 SpectraLink SCO408 SpectraLink SCS416 SpectraLink SCI408 SpectraLink RCC400 SpectraLink SCK408 SpectraLink SCL408 SpectraLink RCU201 SpectraLink SCA416 SpectraLink SCL416 SpectraLink MOG400 SpectraLink SCM416 SpectraLink SCC408 SpectraLink SCC416 SpectraLink SCD416 SpectraLink SCF416 SpectraLink SCN408 SpectraLink SCE416 SpectraLink SCF4089 SpectraLink SCX416 SpectraLink SCD408