Polycom SpectraLink RCO400 User Manual
Page 60
SpectraLink 6300 MCU: Facility Preparation
PN: 1725-36122-001_N.doc
60
The Base Station cables are terminated at the appropriate cross-
connect blocks.
Analog or digital ports, one per handset, from the switch are
terminated at the appropriate cross-connect block and the block is
labeled with the extensions.
A dedicated dial line (MB) is available with an RJ-11 jack for the
diagnostic modem.
An IBM-compatible PC is available to serve as the Operator’s
Console for system administration.
A system administrator is designated for the SpectraLink system.
This person should be present for the installation. The Polycom
field service engineer will provide system training to the system
administrator on the day following the installation.
Signature: _______________________________________
Date: ___________________________________________
If you have any questions regarding the installation procedure, please
call the Polycom Customer Support Hotline at 800 775-5330 (Monday
through Friday, 6 a.m. to 6 p.m. Mountain time).