Promise Technology VTrak 15110 - Manual (Page 75)

Chapter 4: Management with WebPAM PRO
67
The VTrak spins up the disk drives sequentially in order to equalize power draw
during start-up. After a few moments the Power/Activity and Disk Status LEDs
should display green.
See for a discussion of rebuilding and failed disk drives.
Audible Alarm
VTrak’s audible alarm has four sound patterns:
•
Beep. Beep. Beep. – Indicates that a logical drive is rebuilding
• Beep-beep, beep-beep, beep-beep. – Indicates that a logical drive is critical
• Beep-beep-beep. Beep-beep-beep. – Indicates a problem with a field
replaceable unit (FRU)
• 10 second continuous beep – Indicates that a logical drive is offline
See for more information about field-replaceable components.
See for a discussion of critical and offline logical drives.
LEDs
State
Dark
Steady
Green
Flashing
Green
Amber Red
Power/
Activity
No Drive
Drive
Present
Activity n/a n/a
Status
No Power/
No Drive
Drive OK n/a
Drive
Rebuilding
Drive
Error
“n/a” means this state does not apply to this LED.