Promise Technology VTrak 15110 - Manual (Page 146)

VTrak 15110 User Manual
138
There are nine functional groups in the CLU:
Subsystem Management – Allows you view controller information, change
parameters, monitor the enclosure, update the firmware and reboot the VTrak.
Physical Drive Management – Enables you to view disk drive assignments and
parameters, wipe boot and reserve sectors, change disk drive settings and
perform diagnostics.
Disk Array Management – Allows you to view disk array information, create and
delete disk arrays and logical drives, cache policy, hot spare policy, retry count,
SMART settings; rebuilding, synchronization and migration priorities.
Logical Drive Management – Allows you to view logical drive information, name
logical drives and change LUN settings.
Network Management – Make Management Port, Telnet, and SNMP settings,
set IP address for management port, TFTP server and gateway; and set subnet
mask.
SCSI Management – Set channel TIDs and Console LUN.