Promise Technology VTrak 15110 - Manual (Page 15)

7
Chapter 2: Installation
• Unpack the VTrak storage subsystem (below)
• Mount VTrak 15110 in a Rack (page 8)
• Install Disk Drives (page 9)
• Verify the SCSI HBA Card (page 15)
• Connect the SCSI Cables (page 16)
• Connect the Management Cables (page 22)
• Connect the Power (page 23)
• Set-up Management Connections (page 25)
• Set Up Telnet Connection (page 29)
• Install WebPAM PRO Software (page 33)
Unpack the VTrak
The VTrak box contains the following items:
• VTrak Unit
• Quick Start Guide
• Null Modem Cable
• SCSI Terminators (2)
• Left and right mounting rails
• 1.0m External VHDCI SCSI cables (2)
• Screws for disk drives
(64 plus 4 spares)
• 1.5m (4.9 ft) Power cords (2)
• CD with WebPAM PRO Software,
User Manual and Quick Start Guide
Warning
The electronic components within the VTrak disk array are
sensitive to damage from Electro-Static Discharge (ESD).
Observe appropriate precautions at all times when handling the
VTrak or its subassemblies.
Important
In order to work with VTrak, the SCSI Host Bus Adapter (HBA)
card you select for the Host PC must meet requirements. See
page 15.