Promise Technology VTrak 15110 - Manual (Page 30)

VTrak 15110 User Manual
22
Connect the Management Cables
VTrak 15110 has two types of Management connections:
• Management Port connection – Enables you to monitor the VTrak over your
network using the WebPAM PRO Software. VTrak supports Ethernet and
Telnet protocols.
• RS-232 Serial connection – Enables the Command Line Utility (CLU) on
your PC to monitor and control VTrak.
Figure 4. VTrak 15110 serial and network connections
Management Port Connection
The Network connection is for using WebPAM PRO over the network and also for
using the CLU through a Telnet connection.
1. Arrange with your Network Administrator to provide a network connection for
the VTrak.
2. Attach the network cable to the network connector on the VTrak..
RS-232 Serial Connection
The serial connection uses the null modem cable provided with the VTrak.
1.
Attach the null modem cable to the RS-232 serial port on your PC.
2. Attach the other end of the null modem cable to the serial port on the VTrak.
Caution
Do not attempt to connect an Ethernet cable, regular or cross-
over, directly between the VTrak and your PC. This is a network
connection and requires a hub or switch.
Mgmt
IOIOI
Management
Port Connector
RS-232 Serial
Connector