Polycom Audio and Video - Manual (Page 56)

Administrator’s Guide for the V500 System
4 - 10 www.polycom.com/videodocumentation
❑
Install People+Content IP on the computer(s) that the presenter will use to
show content.
You don’t need to change the computer resolutions and you don’t need special
cables or hardware, but the computer(s) must meet these requirements:
• Operating System: Windows 2000, Windows XP Home, or Windows XP
Professional
• Minimum computer: 500 MHz Pentium® III (or equivalent); 256 MB
memory
Recommended computer: 1 GHz Pentium III (or equivalent); 500 MB
memory
Note that, although you can install People+Content IP on only one video
conferencing system, you can install it on an unlimited number of computers.
❑
Connect the computer(s) to the IP network.
For information about purchasing the People+Content IP option, please contact your
Polycom distributor.
To enable People+Content IP on a V500 system:
1. On a computer, open a web browser and go to the Polycom Resource Cneter
Video Downloads page at http://extranet.polycom.com.
2. Enter the license number you received when you purchased the
People+Content IP option.
3. Enter the serial number of the V500 system onto which you want to install
People+Content IP.
You will then receive a People+Content IP software activation key.
4. Go to System > Admin Settings > General Settings > Options on the
V500 system.
5. Enter the People+Content IP software activation key.
To install People+Content IP on a computer:
1. On the computer, open a web browser and go to the Polycom Resource Center
Video Downloads page at
http://extranet.polycom.com .
2. Locate the People+Content IP application and click the link to download the
file locally.
3. Double-click setup.exe .