Polycom Audio and Video - Manual (Page 119)

Appendix
© Polycom, Inc. Appendix - 7
97 Message type
nonexistent or not
implemented The equipment received a message of a type that is
invalid or not supported. This code indicates either a
problem with the remote configuration or a problem with
the local D channel.
98 Message
incompatible with
call state or
message type
nonexistent The equipment received a message that is not valid in
the current call state. Cause 98 is usually due to a
D-channel error. If this error occurs systematically,
report it to your ISDN service provider.
99 Information element
nonexistent or not
implemented The equipment received a message that includes
information elements which were not recognized. This is
usually due to a D-channel error. If this error occurs
systematically, report it to your ISDN service provider.
100 Invalid information
element contents The equipment received a message that includes
invalid information in the information element. This is
usually due to a D-channel error.
101 Message not
compatible with call
state The remote equipment received a message that does
not correspond to the current state of the connection.
This is usually due to a D-channel error.
102 Recovery on timer
expiry A time-out has triggered an error-handling (recovery)
procedure. This problem is typically temporary.
111 Protocol error,
unspecified An unspecified D-channel error when no other standard
cause applies.
127 Interworking,
unspecified An event occurred within a network that does not
provide causes for the action that it takes. The precise
problem is unknown.
145 ISDN layer 1 and/or
2 link not established User needs to check cabling, ISDN adapter status and
network connections.
146 ISDN layer 3
connection to the
ISDN switch/network
inactive There is either a switch protocol error, or (in the United
States or Canada) a SPID assignment problem.
255 ISDN command
processing error The ISDN signaling code has encountered an error
processing an ISDN action. ISDN adapter busy-wait
and retry.
Code Cause Definition