Promise Technology VTrack M-Class M200i - Manual (Page 291)

Chapter 8: Troubleshooting
283
Redundancy Check task
is queued Redundancy Check has been set manually or by
schedule.
Redundancy Check task
is stopped internally The logical drive is offline. See page 286.
Resource
Resource is NOT
available System resources are low. Reduce system load or
restart the VTrak. See page 218.
SEP (Storage Enclosure Processor)
SEP is not found Verify that the SEP is properly installed. See
page 235 or page 236.
SEP is found Normal.
Spare Check
Spare check started on
the given spare drive Result of settings or user action. Normal.
Spare check completed
successfully on the given
spare drive Normal.
Spare Drives
Physical disk assigned as
global spare Result of settings or user action. Normal.
Physical disk is no longer
assigned as global spare Result of settings or user action. Normal.
Global Spare has been
deleted Result of settings or user action. Normal.
Physical disk assigned as
dedicated spare Result of settings or user action. Normal.
Physical disk is no longer
assigned as dedicated
spare Result of settings or user action. Normal.
Dedicated Spare has
been deleted Result of settings or user action. Normal.
SMART
SMART error is received A disk drive reported a SMART error. If this message
appears repeatedly, replace the disk drive.
Event Action