Promise Technology VTrack M-Class M200i User Manual
Page 242

VTrak M-Class Product Manual
234
5.
Detach the connector and lift the battery out of the bracket (above).
6.
Place a new battery into the bracket and attach the connector.
7.
Carefully slide the cooling unit into the enclosure.
8.
Press on the screen to seat the cooling unit (above). The handle will swing in
as the cooling unit is properly seated.
9.
Boot the VTrak and verify that the Battery LED is green.
This completes the battery replacement procedure.
Pull the battery
from the clip
Disconnect
the battery
This manual is related to the following products: