Line 6 POD X3 Family - Manual (Page 45)

Reference: Configuration & Setup
4•1
r
eferenCe
: C
onfiGurAtion
& s
etup
Inputs
Press the Inputs button to get to the Inputs page:
INPUTS
TONE 1 TONE 2
GUITAR SAME
DIGITAL VARIAX
S/PDIF
DISABLE
GLOBAL
CONTROL
Here, you can route your hardware inputs to Tone 1 and Tone 2.
Tone1 – pick an input to get routed to Tone 1.
For POD X3, you can choose Guitar or Microphone. •
For POD X3 Live, you can also choose Aux, Variax, Guitar + Aux, Guitar + Variax, or Guitar + Variax •
+ Aux.
For POD X3 Pro, your choices are Gtr 1, Mic 1, Line 1, Variax, Gtr 1+Gtr 2, Gtr 1+Variax, Gtr 1+Gtr
•
2+Variax, Gtr 2, Line 2, Mic 2, Guitar Stereo, Mic Stereo, Line Stereo, Digital Left, Digital Right and
Digital Stereo.
Tone 2 – pick an input to get routed to Tone 2.
For POD X3, you can choose Same as Tone 1, Guitar, or Microphone. •
For POD X3 Live, you can also choose Aux, Variax, Guitar + Aux, Guitar + Variax, or Guitar + Variax •
+ Aux.
For POD X3 Pro, your choices include all of the Tone 1 input assignment choices listed above, plus
•
Same as Tone 1. Your Tone 2 input choices are restricted, however, depending on the input you’ve
selected for Tone 1. For example, when a Stereo setting is selected for Tone 1 input, Tone 2 will
automatically be set to Locked For Stereo. In this mode, no other input selection will be available for
Tone 2.
Analog Input Restriction
• : POD X3 Pro does not allow simultaneous input from more than one analog
input per Channel Strip. For example, if Gtr 1 is selected as input for Tone 1, no combination of a Tone
1 analog input such as Gtr 1, Mic 1, Line 1, Gtr 1+Gtr 2, Gtr 1+Variax or Gtr 1+Gtr 2+Variax will
be available for Tone 2.
Digital (POD X3 Pro only) – select either S/PDIF or AES/EBU for digital input.
Digital Input Restriction • : Only one digital input can be active at once. For example, if Variax is
selected as an input, AES/EBU and S/PDIF will not be available.