Line 6 POD X3 Family - Manual (Page 24)

Getting Around, Tones & Tuner
2•2
Each block in the path can be selected, turned on or off (except Volume), and tweaked to your liking. To
select a block from the Home Page, use the 4-way Nav button to get to the one you want. When a block is
selected, you’ll see that it gets a frame around it:
Block selected Block not selected
Once you select a block, you can press the On/Off button to turn that block on and off. The color of the block
tells you whether it’s off (inactive) or on (active):
Block on Block off
To tweak a block, select it and double-press the On/Off button. This will open up its Edit Page, where you
can use the Select knob to pick Models (where available) and the Multi-function knobs to change the
corresponding parameters as desired:
If there are multiple rows or multiple pages of parameters in an Edit Page, you can use the Up and Down
buttons to get to them all.
Turn to tweak upper row settings. Turn to tweak lower row settings.
Press up/down to
select upper/lower
row for tweaking.