Linksys ETHERFAST LNE100M User Manual
Page 47
Appendix F: Manually Installing the
Network Components in Windows
98 and Me
There may be times when you will need to manually install missing Windows
networking components.
1. Click on the Start button, select Settings, and open the Control Panel.
2. Double-click the Network icon.
3. Click the Configuration tab. Make sure that the following network com-
ponents are installed.
•
Client for Microsoft Networks
•
EtherFast
®
10/100 Managed Network Adapter
•
IPX/SPX-compatible Protocol
•
NetBEUI
•
TCP/IP
There may be other components listed in addition to the ones shown above. If
any of the above components are missing, add them as follows.
Client for Microsoft Networks
If you plan on connecting to an NT, 2000 or XP file server or peer-to-peer net-
work, click the Add button. Highlight Client and click Add. Choose Microsoft
as the manufacturer in the Network Client box. Highlight Client for Microsoft
Networks and click OK. The computer will begin copying files to your system.
When the installation is complete, you will be asked if you want to reboot.
Click OK.
Instant EtherFast
®
Series
Note: You will likely need your Windows CD-ROM to install net-
work components. If your CD-ROM isnt available, try directing
Windows to c:\windows\options\cabs when asked for a file loca-
tion, providing you have Windows files loaded to this location.
86
EtherFast
®
10/100 Managed Network Adapter
85
5. Right-click on EtherFast 10/100 Managed Network Adapter and select
Uninstall...., as shown in Figure E-3.
6. The Confirm
Device Removal
screen, shown in
Figure E-4, will ask
if you want to
remove the Adapter.
Click the OK but-
ton.
7. Once the Adapter is removed, restart your computer.
Figure E-3
Figure E-4