Linksys ETHERFAST LNE100M - Manual (Page 10)

Instant EtherFast ® Series
4. Select Search for the best driver for your device (Recommended), as
shown in Figure 5-2, and click the Next button.
5. Select Specify a location and type D:\drivers\win98 in the drop-down box,
as shown in Figure 5-3. Then, click the Next button.
11
6. A window will open, notifying you that Windows is searching for the
EtherFast 10/100 Managed Network Adapter driver. When the window noti-
fies you that it is ready to install the driver, as shown in Figure 5-4, click
the Next
button.
7. Windows will begin copying the Adapter’s driver files to your PC. Refer to
the chart below to help guide you through the process.
• If your PC asks for the Linksys
Setup Utility CD
• If you are asked to supply your
Windows 98 Installation Files
or Disks
• If you are asked for a file that
includes “LNE100M” or “WIN-
NDI.DLL” in its name
• If you receive a Version
Conflict error
1. Click OK.
2. Verify that the Setup Utility CD is in your PC’s CD-
ROM drive.
3. Type d:\Drivers\Win98 in the “Copy files from:” box.
4. Click OK.
1. Click OK.
2. If you have a Windows 98 CD-ROM, type d:\win98
in the “Copy files from:” box, where d: is your CD-
ROM drive.
3. If you don’t have a Windows 98 CD-ROM, type
c:\windows\options\cabs.
4. Click OK.
1. Insert the Setup Utility CD into your PC’s CD-ROM
drive.
2. Type d:\Drivers\WIN98 in the “Copy files from:” box.
3. Click OK
1. Choose to keep the newest version of the file by
clicking Yes.
If you press Skip or Cancel, the drivers will not be installed!
Figure 5-4
12
Figure 5-2
Figure 5-3
EtherFast ® 10/100 Managed Network Adapter