3 reconditioning and maintenance – LST 0130 User Manual
Page 67

6.3
Reconditioning and maintenance
Parts of the system that have a fault are not able to perform their functions efficiently or at all. There-
fore have faults repaired as soon as possible by a qualified and authorized company, preferably the one
that performs the periodic maintenance of your system.
Fire detection systems have to be serviced and - if necessary - reconditioned periodically by a qualified
maintainer. Only specialized companies that are demonstrably periodically trained specifically for the
functions of this specific fire detection system by LST or by persons being explicitly authorized by
LST.
A fire detection system that has not been serviced at all or not competently may not be able to
fulfill its purpose to detect a fire reliably and fast. Aside from the resulting gross negligence dan-
ger to human life and to property, a fire insurance may reject the claim for compensation in
such cases!
6.4
Specifications of control panel devices of Series BC216
Mains voltage
230VAC +10/-15%, 50Hz
Power requirement
60VA
Supply current
max. 0.26A
Output-/rated voltage
typ. 28VDC
Peak current
max. 1.8A
Case
steel sheet, 1mm, powder coated
Colour
grey-white, RAL9002
Dimensions w × h × d
420 Ч 520 Ч 120 (mm)
Weight without battery
ca. 6kg
Ambient temperature
-5°C to +50°C
Relative humidity of air
95% (not condensed)
Further detailed specifications are available in Part B of the User Manual of the fire detection control
panel Series BC216.
HB216AE.SAM / 0130 / AN9161202
ZN5002/73/67
User Manual Series BC216 / Part A
Chapter 6 • Ensuring the efficacy of the system by the user
67