beautypg.com

LST 0130 User Manual

Page 35

background image

Authorization level 1

Authorization levels 2 and 3

Main menu points

Submenu points

Main menu points

Submenu points

Alarms

Alarms

Activated actuations

Activated actuations

Technical messages

Technical messages

Faults

Faults

Disablements

Disablements

Test conditions

Test conditions

Zone: *)

Disable
Enable
Activate
Test condition on
Measured value/
maintenance

Actuation:

Disable
Enable
Activate
Meas.val./Maint.

Transmit. device:

Disable
Enable

Alarming device:

Disable
Enable
Activate
Meas.val./Maint.
Silence
Reactivate

Event memory *)

Display all
Control panel
Detector zones

Event memory

Display all
Control panel
Detector zones

System

Event counter
Display test
Repeat print-out

System

Event counter
Display test
LCD contrast
Clock time correct.
Clock time setting

1)

Date setting

1)

Winter/summertime
Summer/wintertime
Componentries
Print-out

1)

Repeat print-out
Stop measurement

print-out

Change user code

1)

Change install.

code

1)

Authorization code:

Exit authorization?

1)

These submenu points are accessible only in authorization level 3 (that means, only to the authorized maintainer).

Table 1:

Overview of the available main and submenus in authorization levels 1 and 2, respectively.
You are scrolling the main menu ring-shaped by using the '

← →

'-buttons, and the submenu by using

the '

↑↓

'-buttons. The corresponding standard-entry-menu point, in normal condition, is marked by *).

Single menu points can be suppressed depending on the context.

The menus for setting the parameters (which are reserved for the installer in authorization level 3) are
not shown in the above table. They are described in detail in Part C of this Manual.

The control panel returns to displaying the event with the highest priority automatically 30 seconds af-
ter a button was pressed last, if an event is currently on the control panel - independent of which menu
point was called last.

HB216AE.SAM / 0130 / AN9161202

ZN5002/73/35

User Manual Series BC216 / Part A

Chapter 4 • Basic operation of the fire detection control panels Series BC216

35

This manual is related to the following products: