LST AO-55000-620 - Manual

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED AO-55000-620_DBL_LST_EN_0804.PDF • PAGE 1
A
Building Safety. Building Security.
Description
The addressable Optical Smoke Detector AO-55000-
620 uses the scattered light principle, and was deve-
loped for the detection of smoke particles in a wide
range of fi re detection applications. The modern design
of the sensing chamber allows to reliably evaluate the
characteristics of fi re.
The proven ADM loop technology with Apollo/Discovery
protocol establishes a permanent communication bet-
ween the fi re detection control panel and the detector.
That ensures a periodical function testing of the detec-
tor. In the control panel all types of fi res are detected by
continuously comparing fi re patterns.
The infl uence of contamination of the optical measure-
ment system is compensated for by using intelligent
evaluation algorithms. With that, the response sensiti-
vity of the detector is kept constant for a long time –
a further effective step to avoid false alarms.
The activated condition of the detector is indicated by a
red LED. The detector address is selected by means of
a code card in the detector base. Therefore the detec-
tor can be changed without additional tools.
The detector can be attached to various bases and it
can be protected against theft.
• ADM loop technology with
Apollo/Discovery protocol
• Optional connection of remote
indicator
• Constant response sensitivity
• Sealed electronics
Specifi cations
Operating voltage Supply through loop voltage
Current consumption typ. 340µA (quiescent)
Ambient temperature -20°C to +60°C
Relative humidity 0 – 95% (no condensation)
Dimensions ш Ч H 100 × 42 (mm)
Colour white
Weight 105g
Approval VdS G294028
Order number 241023
Order name Optical Smoke Detector/Anal./XP95/Apo AO-55000-620