Lanier 5705 - Manual (Page 75)

Job Preset
61
2
To set the original in the document feeder
A Set a stack of originals in the document feeder, then press the {
Start } key.
Note
❒ The last page should be on the bottom.
To set the original on the exposure glass or in the document feeder using
Batch/SADF mode
Reference
See
⇒
P.32 “Batch/SADF Mode”.
A Set the original, then press the {
Start } key.
Note
❒ Start with the first page to be copied.
B When it has been scanned in, set the next original, then press the {
Start }
key.
Note
❒ Set the original in the same direction as the first one.
C After all originals have been scanned, press the {
# } key.
The copies are delivered to the tray.
Note
❒ When you wish to return the copying display, press the [Stop Copying]
key on the display panel.
Editing Job Preset
A
Press the [Job List] key.