Lifescan One Touch Basic Plus Diabetes Monitoring System - Manual (Page 69)

CAUTION: Do not get water
inside the meter. Do not
immerse meter in water.
62
Step 3: Clean the Test Area.
The following cleaning agents will
damage the meter.
DO NOT USE:
■ Alcohol
■ Cleansers with ammonia or phenol
■ Glass cleaners
■ Abrasive cleansers
Check the clear, protective coating
over the test area to make sure it is
not scratched or damaged.
Rub the test area with a cotton swab
or soft cloth dampened with water
to remove all blood, dirt, or lint from
the test area. If necessary, a mild
liquid dishwashing detergent mixed
with water may also be used. Do not
apply full-strength detergent to the
test area. Be careful not to scratch the
test area. Dry the test area with a soft,
dry tissue or cloth. Remove any lint.
C C M
C C M