Lifescan One Touch Basic Plus Diabetes Monitoring System User Manual

Page 20

How to do a check strip test:

Step 1: Press the On/Off Button.
Insert Side 1 of the Check Strip.

When insert code 10 (Example)

strip appears, slide
the notched end of the
check strip into the
test strip holder with
Side 1 (purple side)
facing up. wait
appears for a moment.

Step 2: When
apply sample
Appears, Remove the
Check Strip from the
Test Strip Holder.

✔

Step 3:
When insert side 2
Appears, Turn the
Check Strip Over
and Slide It Back
into the Test Strip
Holder.

It should go in notched end first,
Side 2 (white side) facing up. The
meter counts down from four to zero
and then gives you a check strip
result.

Note: This is the only time you
should remove a strip during a test.

Note: Do not apply control
solution to the check strip.

✔