Lifescan One Touch Basic Plus Diabetes Monitoring System - Manual (Page 44)

37
SETTING METER
OPTIONS
You do not have to enter the set-up
mode to test. However, you can
customize the various option settings
of your ONE TOUCH
™ BASIC ™ Plus
Meter to best meet your needs. This is
done in the set-up mode. Option
settings (for example) that you
can customize include:
■ Clock (Time and Date):
■ Beep Prompts:
■ Language:
■ Time Format:
■ Date Format:
■ Unit of Measure:
■ Decimal Separator:
To change the default settings, enter
the set-up mode.
Entering and Using the
Set-Up Mode
To enter the set-up mode, start with
your meter turned off. Press and
hold the on/off button for about
three seconds until all display
symbols appear and begin to
flash. Release the on/off button.
The set-up screen will then
appear briefly.
The meter will then automatically
present the first option screen. The
options map will help guide you
through the option screens.