Lifescan InDuo blood glucose meter User Manual
Quick reference guide

Enter Code Mode.
Insert test strip to turn on meter.
“OneTouch UltraSmart” will appear,
followed by code number.
See Code Number.
Code number will appear on display.
Match Code Numbers.
Compare code number on meter display
with code number on test strip vial. If
matching, begin testing. If not matching,
see Step 4.
STEP 1
STEP 2
STEP 3
Select Test Mode.
Use Arrow button
to select
“Apply Blood” for fingertip sample
or “Alternate Site” for forearm and
palm samples. Do Not select Control
Solution mode when testing blood.
Failure to select correct test mode
may cause blood glucose averages
to be incorrect.
Insert Test Strip.
Push it all the way in until it will go no
further. Meter turns on automatically.
Very high blood glucose level
exceeding 33.3 mmol/L.
There may be a problem with meter.
1) Turn off meter. Enter Set-up mode.
Reset meter before testing; or
2) Turn off meter. Enter Set-up mode.
Reset language, date, time and
meter code.
If Error 1 message continues,
Do Not
use the meter. Call the OneTouch
®
Customer Care Line at 1 800 663-5521
for a replacement meter.
Used test strip inserted or problem
with meter. Repeat test with new test
strip.
Blood or control solution sample
applied before “Apply Blood”,
“Alternate Site”, or “Control Solution”
appeared on display. Repeat test with
new test strip.
Fill Confirmation Window.
Be sure confirmation window is full
before meter counts down. If window
is not full before meter begins
countdown, repeat test with new
test strip. Do Not add more blood to
the test strip; discard the test strip
and retest.
Accurate Results in Just 5 Seconds.
1) New meter not coded. Code meter; or
2) Meter lost power briefly and
entered Set-up mode. Reset code
number.
Test result with suggestion to check
ketone levels.
Test result is from 1.1 through 3.3
mmol/L with meal or snack reminder.
Blood glucose level lower than
1.1 mmol/L.
Code Meter.
Scroll up or down with Arrow button
.
Meter is ready for testing.
Apply Blood
Code
---
Check Code
Comment? Press OK
23.0
mmol/L
Sep 8-02 8:30 am
Check Ketones
1.9
mmol/L
Sep 8-02 8:30 am
Comment? Press OK
Do youneed a snack?
WARNING
Below 1.1 mmol/L
LOW
GLUCOSE
Alternate Site
5.8
mmol/L
Sep8-02 8:30 am
Code the meter before using it for the first time and every time
you change to another vial of OneTouch
®
Ultra
®
Test Strips.
Test Summary
Note: Before testing, wash hands with warm, soapy
water. Rinse and dry thoroughly.
STEP 1
STEP 4
STEP 2
STEP 3
STEP 4
STEP 5
Display Symbols and Messages
Coding the Meter
WARNING
Above 33.3 mmol/L
HIGH
GLUCOSE
WARNING
See Owner’s Booklet
Error 1
Call customer service
WARNING
See Owner’s Booklet
Error 2
Meter or strip problem
Please repeat test
WARNING
See Owner’s Booklet
Error 3
Meter not ready
Please repeat test
©2006 LifeScan,Inc. Milpitas, CA 95035 U.S.A.
Rev. date: 08/2006 AW 06139403A
Quick Reference Guide
AW 06139403A
WARNING: If mmol/L does not appear
with the test result, call the OneTouch
®
Customer Care Line at 1 800 663-5521.
Touch and hold drop of blood to
the narrow channel in the top
edge of the test strip.
Apply Sample.
CAUTION:
Matching the code on the meter and the code on
the test strip vial is essential to obtain accurate results. Each
time you test, check to make sure the code numbers match.
(Example)
(Example)
(Example)
(Example)
(Example)
(Example)
Need help?
Call the OneTouch
®
Customer Care Line at
1 800 663-5521
Visit us at www.OneTouch.ca
DCO_06139403A_OUS_QRG_CAe 9/6/06 1:05 PM Page 1