Lifescan One Touch Basic Plus Diabetes Monitoring System - Manual (Page 18)

11
Step 3: Code the Meter.
While the meter displays code--,
or after the word insert is displayed,
press and release the C button; the
code number will appear. Continue
pressing the C button until the
number on the display matches the
code number on the test strip vial.
The code number is now set for the
test strips you are
using. The meter will
remember this code
number until you
change it. You are now
ready to do a test.
Checking the System
There are two ways to check that your
ONE TOUCH
™ BASIC ™ Plus System is
working properly. The check strip is
used to check that the meter is
operating properly. ONE TOUCH
™
Normal Control Solution is used to
check that both the meter and the test
strips are working together as a
system, and that you are doing the
test correctly. It is very important that
you do these simple checks routinely
for accurate results.
M M C
Plus