Lifescan One Touch Basic Plus Diabetes Monitoring System - Manual (Page 55)

48
A blood test has been completed. This indicates a
blood glucose result when the meter is set for mg/dL.
A blood test has been completed. This indicates a
blood glucose result when the meter is set for
mmol/L.
A control solution test has been completed. (If you
have just performed a blood glucose test, this means
that the blood sample was too small and the meter
read it as control solution. Repeat the test with a new
test strip and a larger drop of blood.)
You are performing a check strip test. Turn the check
strip over and insert Side 2.
(Example)
MESSAGE APPEARS WHEN
(Example)
(Example)
insert
s i d e 2