Lifescan One Touch Basic Plus Diabetes Monitoring System - Manual (Page 54)

47
The meter is turned on. This is a reminder that
prior to testing you should verify that the code
displayed on the meter matches the code on the
test strip vial. If it does not, reset by pressing the
C button.
The meter is ready to perform a blood, check strip,
or control solution test.
The meter is performing internal checks.
The meter is ready to receive a blood or control
solution sample. If performing a check strip test,
this is your signal to remove the check strip from
the meter.
The meter is counting down from 45 seconds to 0.
MESSAGE APPEARS WHEN
check
code
insert
c o d e 1 0
(Example)
strip
wait
apply
sample
45 . . . . . 0