Lifescan One Touch Basic Plus Diabetes Monitoring System - Manual (Page 51)

44
Unit of Measure
The meter is set to display test
results in milligrams per deciliter
(mg/dL). You have the option to
change to millimoles per liter
(mmol/L).
To change the unit of measure, enter
the set-up mode (see page 37). Use
the M button to choose the Unit of
Measure option. Press the C button
to change the unit of measure. You
may now press the M button to
review or change any of the options
you have chosen or press the on/off
button to turn the meter off.
Decimal Separator
The meter is set to display mil-
limoles per liter (mmol/L) using a
decimal point. This option allows
you to select a comma instead of a
decimal point as a decimal separator.
Note: The Decimal Separator
option appears only if you have
selected mmol/L as your unit
of measure.