Lexmark 7300 Series - Manual (Page 62)

6 Press .
7 Press or until Block appears.
8 Press to save this setting.
Blocking junk faxes
If you have Caller ID, you can block faxes sent from specific numbers and/or all faxes which do not include a Caller
ID number.
1 From the control panel, press Fax Mode.
2 Press .
3 If you want to block faxes from specific phone numbers:
a Press or repeatedly until Block Faxes appears.
b Press .
appears next to Turn ON/OFF .
c Press .
d Press or repeatedly until On appears.
e Press .
f Press or repeatedly until Add Number appears.
g Press .
h Enter a phone number.
i Press .
j If you want to enter a corresponding name, enter it using the keypad buttons.
k Press .
l If you want to enter additional numbers:
1 Press 1 on the keypad.
2 Repeat step h through step k.
Note: You can enter up to 50 phone numbers.
m If you do not want to enter additional numbers, press 0.
4 If you want to block all faxes that do not provide a Caller ID number:
a Press or repeatedly until No “ID” Calls appears.
b Press .
c Press or repeatedly until On appears.
d Press to save the setting.
5 If you want to print a list of blocked faxes:
a Press or repeatedly until Print List appears.
b Press to print the list.
62